Sothis CHD-21311 clean room Pass-Through Chamber

Short Description:

Sothis CHD-21311 clean room Pass-Through Chamber seamlessly install within minutes, mount flush to cleanroom walls to support critical cleanliness applications with strict disinfection protocols


Product Detail

Product Tags

Features

  • Easy-to-sterilize 316L stainless steel clean room pass through for sterile bio-pharma applications
  • Obstruction free interior, lipless edges, radius corners, continuous welds for strict disinfection
  • Quick and easy flush-mount design is hassle-free and installs in under 3 minutes (see video)
  • Hidden automatic door interlock allows only one door to open at a time to prevent cross-contamination
  • Lift-off hinges allow doors to be easily removed for more thorough cleaning

• Window Material: PVC

• Material: 316L Stainless Steel

• Mounting Position: Flush Wall, Flush Floor, Center Wall, Center Floor

• Storage Racks: Optional, Included

• Inside Width: 305 mm, 457 mm, 610 mm, 914 mm, 762 mm, 622 mm

• Inside Depth: 305 mm, 457 mm, 610 mm, 914 mm, 762 mm, 503 mm

• Inside Height: 305 mm, 610 mm, 406 mm, 914 mm, 1219 mm, 457 mm, 762 mm, 432 mm

Both OEM and ODM are available

Product Details

• Easy-to-sterilize 316L stainless steel clean room pass through for sterile bio-pharma applications

• Obstruction free interior, lipless edges, radius corners, continuous welds for strict disinfection

• Quick and easy flush-mount design is hassle-free and installs in under 3 minutes (see video)

• Hidden automatic door interlock allows only one door to open at a time to prevent cross-contamination

• Lift-off hinges allow doors to be easily removed for more thorough cleaning

• Clean room pass throughs reduce foot traffic, improve cleanliness, safety, productivity, and much more.

• CHAMBER DESIGN:

• All-316L stainless steel surfaces with enhanced corrosion resistance stand up to harsher cleaning agents and withstand degradation from bleach-based disinfectants.

• Continuous welds with coved radius corners and lip-less edges eliminate hard-to-clean cracks and crevices where contaminants can collect.

• Double-wall construction greatly increases rigidity and durability of the pass through chamber to facilitate installation and prevent warping on larger chambers.

• Flush-mount design removes dust accumulating surfaces inside the clean room.

• Center-mount variation allows chamber to be centered in the clean room wall.

• Floor-mounted design includes removable ramps to support transfer of carts and heavy equipment between controlled spaces.

• Optional dual BioSafe® stainless steel racks easily remove for cleaning or sterilizing and are reversible to allow slide-out motion in either direction.

• QUICK AND CLEAN INSTALLATION:

• Innovative fastening system clamps to a variety of wall thicknesses without penetrating or damaging the finished surrounding wall.

• The mounting frame is covered on both sides for an easy-to-clean finish with no visible fasteners or screws.

• Easy-to-install mounting system also allows the entire pass through chamber to be seamlessly removed and reinstalled within minutes, without damaging the surrounding wall.

• HIDDEN AUTOMATIC DOOR INTERLOCK:

• Hidden Interlock mechanism is mounted outside the transfer chamber (between double-wall) for easy-to-clean obstruction-free chamber interior.

• Rugged Sothis mechanical interlock design uses rigid stainless steel rods that run through the door and firmly lock into the lift latches.

• DOOR DESIGN:

• Access doors with 316L stainless steel reinforced frames extend pass through chamber's service life and provide a tight seal.

• Doors are leak-rated by UL for tight seal to maintain clean room pressure gradients.

• Heavy-duty stainless steel lift latches minimize scratching, corrosion and contamination resulting over time that can occur with chrome-plated latches.

• Sturdy "lift-off" stainless steel hinges are welded to the door frame and chamber. They are detachable to allow doors to easily lift off for more thorough cleaning/decontamination or trouble-free replacement.

• Order replacement door(s) to avoid critical operation delays should a door be damaged and require immediate replacement.

• INCLUDES:

• (1) Automatic mechanical interlock.

• Mounting bracket system with cover plates. Standard mounting system accommodates 4”-6” wall thickness. Specify wall thickness at time of order.

Window Material: PVC

Material: 316L Stainless Steel

Mounting Position: Flush Wall, Flush Floor, Center Wall, Center Floor

Storage Racks: Optional, Included

Inside Width: 305 mm, 457 mm, 610 mm, 914 mm, 762 mm, 622 mm

Inside Depth: 305 mm, 457 mm, 610 mm, 914 mm, 762 mm, 503 mm

Inside Height: 305 mm, 610 mm, 406 mm, 914 mm, 1219 mm, 457 mm, 762 mm, 432 mm

1. Mounts Flush

2.Integral bracket

3.316L stainless steel

4.Automatic interlock

5.LiftLatches

6.One-Piece Gasket


  • Previous:
  • Next:

  • Send your message to us:

    Write your message here and send it to us

    Send your message to us:

    Write your message here and send it to us